DESCRIPTION

    BASE

    Indoor, self-rinsing Evaporator Coil Cleaner

    • No foaming action – only attacks dirt buildup, not metal
    • Dilute Self Rinsing Base with 24 parts water – 1 quart makes over 6 gallons evaporator cleaner
    • Rinsing not required – normal condensation will carry away dirt and contamination
    • May irritate eyes and skin – excessive contact should be avoided

    INFO SHEET & SDS

    pdfcropped 1OPEN SDS

    pdfcropped 1OPEN INFO

    PRODUCT SIZES

    ITEM #CASEQTY
    H-SR011 GAL4
    H-SR3232 OZ6

    DIRECTIONS FOR USE

    DIRECTIONS FOR USE:
    (Window Units, Small Central Units)
    Read entire label & Safety Data Sheet before use.

      • – Dilute with 24 parts water (approx. 5-6 oz. per gallon of water).

     

      • – Shut unit off.

     

      • – Spray coil thoroughly using a coarse spray to avoid misting.

     

      • – Wait 5 minutes and resume normal operation.

     

      • – No rinsing is required when condensation is present. If condensation is not expected, rinse with water.

    (Commercial Systems, Air Handling Units)

      • – Dilute with 24 parts water (approx. 5-6 oz. per gallon of water).

     

      • – If possible leave air-flow on during application.

     

      • – Spray intake side of coil with coarse spray until saturated to the run off point. (Suction of system will cause complete coil penetration.) Refuse and contamination will drain as condensate.

     

      • – If it is not possible to leave air-flow on during application, spray coil thoroughly and turn air on immediately after application.

     

      – If condensation is not expected, rinse with water.