DESCRIPTION

    HYDRO-TREAT

    Color Coded Cooling Water Treatment

      HYDRO-TREAT utilizes polymerphosphonates for scale control; corrosion control is maintained by the formation of a protective molybdenum film on metal surfaces. HYDRO-TREAT also contains dispersants and peptizing agents to keep heat transfer surfaces free of insoluble materials such as silt, sand and airborne particles.
      HYDRO-TREAT makes cooling water treatment dosage a simple matter of matching colors. Addition of HYDRO-TREAT will turn circulating water blue. Treatment levels are easily maintained by using HYDRO-TREAT color coded visual test strips.

    • Easy to use
    • Controls scale and corrosion
    • Eliminates complicated testing procedures
    • Economical, 1 qt. per 1,000 gal.
    • Biodegradable
    • No chromates or heavy metals
    • Non-volatile

    SDS/INFO SHEET

    pdfcropped 1OPEN SDS

    pdfcropped 1OPEN INFO

    PRODUCT SIZES

    ITEM #CASEQTY
    H-9011 GAL4
    H-9055 GAL1

    DIRECTIONS FOR USE

    DIRECTIONS FOR USE:

      • HYDRO-TREAT may be fed either by the use of plastic feeding pumps or in slug doses. Normal dosage of HYDRO-TREAT will range between 200 and 300 ppm in circulating water. (Approximately 1 quart per 1000 gallons of water.)

    CONTROL:

      Use HYDRO-TREAT color coded test strips to match color of circulating water. Over treatment is not harmful. Be sure HYDRO-TREAT is thoroughly mixed in circulating water before testing. Maintain adequate bleed off rate. Use HYDRO-CIDE for control of algae and microbiological fouling.
    SKU: H-901 Category: