SWAT WASP & HORNET KILLER (14 OZ)

DESCRIPTION

SWAT

WASP & HORNET KILLER SPRAY

  • Quick Kill
  • Kills the Entire Nest
  • Kills with Residual Action as Wasps and Hornets Return to Nest
  • Prevents Nesting
  • Acts as a Barrier that Prevents Insects from Entering the Home
  • JET SPRAY— Will Reach Nests up to 20 Feet Above Ground
  • Drops Wasps, Hornets and Yellow Jackets Instantly
  • Electrically Non-Conducting
  • Dielectric Breakdown Voltage of 49,500 Volts
  • Can Be Used Both Indoors (attics and other places where nests are built) and Outdoors on Wasp & Hornet Nests
  • Triple Action Formula
  • Contains No CFC’s or Other Ozone Depleting Substance

INFO SHEET & SDS

OPEN SDS

OPEN INFO

PRODUCT SIZES

ITEM # SIZE QTY
H-214 14 OZ 12

DIRECTIONS FOR USE

DIRECTIONS FOR USE:

    It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read Entire Label. Do not enter or allow others to enter until sprays have dried. Do not enter or allow others to enter until vapors, mists, and aerosols have dispersed, and the treated area has been thoroughly ventilated. Do not use in commercial food/feed handling establishments, restaurants or other sites where food/feed is commercially prepared, processed, or served. Not for use as a space spray indoors. All outdoor applications must be limited to spot or crack-and-crevice treatments only. Do not make applications during rain. Do not apply when food is present. Do not apply directly into sewers, drains, gutters, or any area where drainage to sewers, storm drains, water bodies, or aquatic habitat can occur. Do not allow the product to enter any drain during or after application. When used in dairy barns or facilities: Close milk bulk lids to prevent contamination from spray and from dead or falling insects. Remove or cover milking utensils before application. Wash teats of animals before milking. Do not apply this product in a way that will contact workers or other persons, either directly or through drift; only protected handlers may be in the area during application. For best results, spray in early morning or late evening when insect activity is minimal. Stand a safe distance from nest and not directly underneath. Remove protective cap. Hold can upright and point spray opening toward nest with wind at your back. Spray until nest is thoroughly saturated to kill the entire nest population. Residual action will kill wasps and hornets returning to the nest. Wait at least 24 hours before removing the nest. To kill wasps, hornets and yellow jackets under eaves, screens, window frames, doors, patios, cracks, holes or crevices wherever insects are noticed, spray for about 1-2 seconds or until surfaces are moist. To prevent entrance of insects into the house, spray around points where insects enter such as outside plumbing, faucets, etc., and cracks or crevices in foundation as well as along sills and ledges. Do not apply to pets or contaminate feed, foodstuffs, dishes or utensils. Avoid spraying vegetation directly.