Indoor BASE

Concentrate
Self-Rinsing Evaporator Coil Cleaner

• No foaming action – only attacks dirt buildup, not metal
• Dilute Self Rinsing Base with 24 parts water – 1 quart makes over 6 gallons evaporator cleaner
• Rinsing not required – normal condensation will carry away dirt and contamination
• May irritate eyes and skin – excessive contact should be avoided

Directions For Use:

Read entire label & Safety Data Sheet before use.

(Window Units, Small Central Units)

• Dilute with 24 parts water (approx. 5-6 oz. per gallon of water).
• Shut unit off.
• Spray coil thoroughly using a coarse spray to avoid misting.
• Wait 5 minutes and resume normal operation.
• No rinsing is required when condensation is present. If condensation is not expected, rinse with water.

(Commercial Systems, Air Handling Units)

• Dilute with 24 parts water (approx. 5-6 oz. per gallon of water).
• If possible leave air-flow on during application.
• Spray intake side of coil with coarse spray until saturated to the run off point. (Suction of system will cause complete coil penetration.) Refuse and contamination will drain as condensate.
• If it is not possible to leave air-flow on during application, spray coil thoroughly and turn air on immediately after application.
• If condensation is not expected, rinse with water.

Additional Sizes

Dillution