SKU: H-501, H-505, H-555

Acid-Type, Foaming, Air-Cooled Condenser Cleaner & Brightener

  • Expanding foam action
  • Best for brightening – makes condenser coils look new
  • Dilution rates from 2 to 10 parts water
  • Must be thoroughly rinsed with water
  • Contains hazardous components Hydrofluoric Acid and Phosphoric Acid
  • Outdoor use only, protective gloves, and eye & face protection required

Directions For Use:

Do Not Use On Indoor Coils. Use Only Outdoors.

Tip: Cleaning action is accelerated if condenser coil is still warm from use. Product effectiveness is enhanced by high ambient air temperature.

  • Read entire label and Safety Data Sheet before use.
  • Disconnect all power before working on equipment.
  • Protect surrounding area from over-spray.
  • Use acid resistant sprayer and coarse spray to avoid misting.
  • Always spray downwind.
  • Spray between fins using horizontal motion, working from the bottom up.
  • Wait 3 to 4 minutes until foam begins to subside and rinse completely with large amounts of water.
  • Flush sprayer completely with water after use.

Additional Sizes

H-5011 GAL4
H-5055 GAL1
H-55555 GAL1
Mix 1 part cleaner with:
3 parts water
(heavy duty)
6 parts water
(medium duty)
10 parts water
(light duty)