Ice Machine Cleaner & Disenfectant

New Product Coming 2024

  • Salmonellacidal Bactericidal Pseudomonacidal Staphylocidal Fungicidal *Virucidal
  • Removes slime and scale buildup and restores efficiency of ice machines
  • Fast acting, non-foaming
  • Nickel Safe
  • Meets Manitowoc spec. GES-6 for ice machine cleaner
  • All food-grade ingredients

DISINFECTION / DEODORIZING DIRECTIONS: If surfaces are visibly dirty, preclean prior to disinfection/deodorizing activity. Prepare a solution of 2 oz. of product per gallon of water. Apply use-solution with a cloth, sponge, mop, coarse trigger sprayer, or by soaking to thoroughly wet all surfaces. For sprayer applications, use a coarse spray device. Spray 6-8 inches from the surface, rub with a brush, cloth or sponge. Do not breathe spray. Let solution remain on the surface for a minimum contact time of 10 minutes. Wipe dry with a clean cloth or sponge or allow to air dry. The use solution is prepared fresh for each use then discarded. Rinsing is not necessary unless floors are to be waxed or polished. Food contact surfaces must be thoroughly rinsed with potable water.
This product is not to be used as a terminal sterilant / high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to preclean or decontaminate critical or semi-critical medical devices prior to sterilization or high level disinfection.
VIRUCIDAL DIRECTIONS*: Virucidal against *Bovine rhinotracheitis, *Avian Infectious Bron-chitis virus, *Avian Influenza Virus (H5N1), *Newcastle Disease virus, *Marek’s Disease Virus and *Infectious Bronchitis Virus – rkansas strain (IBV) according to the virucidal qualification, modi-fied in the presence of 5% organic serum at a 1:64 dilution. Follow Disinfection directions.

Directions for use:

Read entire label & Safety Data Sheet before use.

  • Follow equipment manufacturer’s cleaning instructions. If not available, use the following as a guide:
  • Drain machine and refill with fresh water.
  • Turn off refrigeration and leave pump in operation if possible.
  • Add H.B. 40 to circulating water at the rate of 3 – 6 ounces per gallon.
  • Circulate for approximately 30 minutes, brushing solution on surfaces not contacted by circulating solution.
  • Extra heavy scale may require repeat application. Clean drums by mixing 8 ounces H.B. 40 with 2 quarts water and brush on scaled surfaces.

Additional Sizes

H-IMS1616 OZ12