4x-BASE
SKU:
H-4X32, H-4X01
Concentrate(BASE)
Non-Acid Condenser Cleaner
- Properly dilute with water according to label instructions before use:
– 6 to 24 parts water for expanding foam on condenser coils
– 80 parts water for electronic filters, blowers, registers and other components - Excellent on greasy contamination
- U.S.D.A. accepted
- Contains hazardous component Potassium Hydroxide
- Must be thoroughly rinsed with water
- Good ventilation, protective gloves, and eye protection required
Directions For Use:
Do Not Use On Indoor Coils. Use Only Outdoors.
TIP:Cleaning action is accelerated if condenser coil is still warm from use.
- Read entire label & Safety Data Sheet before use.
- Disconnect all power before working on equipment.
- Protect surrounding area from over-spray.
- Using a suitable low-pressure sprayer, dilute cleaner with water according to dilution rates below.
- Always spray downwind with a coarse spray to avoid misting.
- Spray between fins using horizontal motion, working from the bottom up.
- Wait 3 to 4 minutes until foam begins to subside and rinse completely with large amounts of water.
- Flush sprayer completely with water after use.
Additional Sizes
| ITEM # | CONTAINER SIZE | QTY |
|---|---|---|
| H-4X01 | 1 GAL | 4 |
| H-4X32 | 32 OZ. | 6 |
| Add 1 part cleaner with: | ||
|---|---|---|
| 6 PARTS WATER HEAVY DUTY EXPANDING FOAM ACTION | 24 PARTS WATER MEDIUM DUTY CLEANING DEGREASING/BRIGHTENING | 80 PARTS WATER LIGHT DUTY ELECTRONIC FILTERS, BLOWERS, REGISTERS |
Additional information
