DESCRIPTION
BASE
Indoor, self-rinsing Evaporator Coil Cleaner
- No foaming action – only attacks dirt buildup, not metal
- Dilute Self Rinsing Base with 24 parts water – 1 quart makes over 6 gallons evaporator cleaner
- Rinsing not required – normal condensation will carry away dirt and contamination
- May irritate eyes and skin – excessive contact should be avoided
OPEN SDSPRODUCT SIZES
| ITEM # | CASE | QTY |
| H-SR01 | 1 GAL | 4 |
| H-SR32 | 32 OZ | 6 |
DIRECTIONS FOR USE
- DIRECTIONS FOR USE:
(Window Units, Small Central Units)
Read entire label & Safety Data Sheet before use.
– Dilute with 24 parts water (approx. 5-6 oz. per gallon of water).
– Shut unit off.
– Spray coil thoroughly using a coarse spray to avoid misting.
– Wait 5 minutes and resume normal operation.
– No rinsing is required when condensation is present. If condensation is not expected, rinse with water.
(Commercial Systems, Air Handling Units)
– Dilute with 24 parts water (approx. 5-6 oz. per gallon of water).
– If possible leave air-flow on during application.
– Spray intake side of coil with coarse spray until saturated to the run off point. (Suction of system will cause complete coil penetration.) Refuse and contamination will drain as condensate.
– If it is not possible to leave air-flow on during application, spray coil thoroughly and turn air on immediately after application.
– If condensation is not expected, rinse with water.
