ZipFresh

SKU: ZC-03

360° Evaporator Coil Cleaner & Disinfectant

New Product Coming 2024

  • Fungicide (Against Pathogenic Fungi)
  • Mildewstat (On Hard, Inanimate Surfaces)
  • Kills 99.9% of Bacteria**
  • Fresh Scent
  • Works upside down for hard to reach areas

This product is not for use on critical and semi-critical medical device surfaces.
DISINFECTION
Cooling Coils Disinfectant Cleaner. This product is a disinfectant cleaner for small air conditioner cooling coils and refrigeration equipment, refrigerator, or freezer evaporative coils. When using this product to disinfect and clean cooling coils or evaporative coils, disconnect
power to the unit before applying product. Follow the directions under the DISINFECTION, DEODORIZATION AND CLEANING section.
DEODORIZING
This product is also perfect for: PTACs, Window Units, Mini-Splits. Remove cover and filters. Spray this product on coil and hard, inanimate surfaces (blower wheel, condensate pan and drains).
DIRECTIONS FOR USE:
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. DISINFECTION, DEODORIZATION AND
CLEANING – Shake can before using. Hold container six to eight inches from surface to be treated. Spray area until it is covered with white
foam. Allow foam to penetrate and remain wet for 10 minutes. No scrubbing is necessary. Wipe off with a clean cloth, mop or sponge. This product will not leave grit or soap scum. Surfaces which may contact food must be rinsed thoroughly with potable water after use. For heavily soiled areas, a pre-cleaning step is required before treatment. When used in food processing establishments, cover or remove all food and packaging materials, remove all gross soils, saturate all surfaces with the spray product, scrub to loosen all soils, allow to soak for 10 minutes, thoroughly rinse all wetted and cleaned surfaces with potable water.
MILDEWSTAT – To control mold and mildew on pre-cleaned, hard, non-porous surfaces spray surface to be treated making sure to wet completely. Let air dry. Repeat application at weekly intervals or when mildew growth appears.
BACTERICIDAL ACTIVITY – When used as directed, this product exhibits effective disinfectant activity against the organisms: Staphylococcus aureus, Salmonella enterica and Pseudomonas aeruginosa and meets AOAC Germicidal Spray Products Test requirements for hospital disinfectants.
** Staphylococcus aureus (Staph), Salmonella enterica (Salmonella), Pseudomonas aeruginosa
FUNGICIDAL ACTIVITY – This product is fungicidal against the pathogenic fungi, Trichophyton mentagrophytes a cause of ringworm, when used as directed on hard surfaces found in bathrooms, shower stalls, locker rooms, or other clean, non-porous, hard

ACTIVE INGREDIENTS
n-Alkyl (60% C14, 30% C16, 5% C12, 5% C18) dimethyl benzyl ammonium chlorides….0.1%
n-Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chlorides…………………0.1%
INERT INGREDIENTS……………………………………………………………………99.8%
TOTAL…………………………………………………………………………. . . . . ……100.0%


EPA REG. NO. 1839-84-46463
EPA EST. NO. 9143-TX-1

Available Sizes

ITEM #CASEQTY
ZC-0319 OZ12

Additional information