DESCRIPTION

    4x Base

    NON-ACID CONDENSER CLEANER(BASE)

    • Properly dilute with water according to label instructions before use:
      – 6 to 24 parts water for expanding foam on condenser coils
      – 80 parts water for electronic filters, blowers, registers and other components
    • Excellent on greasy contamination
    • U.S.D.A. accepted
    • Contains hazardous component Potassium Hydroxide
    • Must be thoroughly rinsed with water
    • Good ventilation, protective gloves, and eye protection required

    INFO SHEET & SDS

    pdfcropped 1OPEN SDS

    pdfcropped 1OPEN INFO

    Product Sizes

    ITEM #CONTAINER SIZEQTY
    H-4X011 GAL4
    H-4X3232 OZ.6

    DIRECTIONS FOR USE

    DIRECTIONS FOR USE:
    DO NOT USE ON INDOOR COILS. USE ONLY OUTDOORS.
    TIP:

      • Cleaning action is accelerated if condenser coil is still warm from use.

     

      • – Read entire label & Safety Data Sheet before use.

     

      • – Disconnect all power before working on equipment.

     

      • – Protect surrounding area from over-spray.

     

      • – Using a suitable low-pressure sprayer, dilute cleaner with water according to dilution rates below.

     

      • – Always spray downwind with a coarse spray to avoid misting.

     

      • – Spray between fins using horizontal motion, working from the bottom up.

     

      • – Wait 3 to 4 minutes until foam begins to subside and rinse completely with large amounts of water.

     

      – Flush sprayer completely with water after use.

    You may also like…