SKU: H-SR32, H-SR01

SELF RINSING BASE

Description

Indoor, self-rinsing Evaporator Coil Cleaner



  • No foaming action – only attacks dirt buildup, not metal
  • Dilute Self Rinsing Base with 24 parts water – 1 quart makes over 6 gallons evaporator cleaner
  • Rinsing not required – normal condensation will carry away dirt and contamination
  • May irritate eyes and skin – excessive contact should be avoided


DIRECTIONS FOR USE:

Read entire label & Safety Data Sheet before use.

(Window Units, Small Central Units)

  • Dilute with 24 parts water (approx. 5-6 oz. per gallon of water).
  • Shut unit off.
  • Spray coil thoroughly using a coarse spray to avoid misting.
  • Wait 5 minutes and resume normal operation.
  • No rinsing is required when condensation is present. If condensation is not expected, rinse with water.


(Commercial Systems, Air Handling Units)

  • Dilute with 24 parts water (approx. 5-6 oz. per gallon of water).
  • If possible leave air-flow on during application.
  • Spray intake side of coil with coarse spray until saturated to the run off point. (Suction of system will cause complete coil penetration.) Refuse and contamination will drain as condensate.
  • If it is not possible to leave air-flow on during application, spray coil thoroughly and turn air on immediately after application.
  • If condensation is not expected, rinse with water.

Additional Sizes

ITEM #CASEQTY
H-SR011 GAL4
H-SR3232 OZ6

Dillution

Window Units, Small Central UnitsCommercial Systems, Air Handling Units
Dilute with 24 parts water (approx. 5-6 oz. per gallon of waterDilute with 24 parts water (approx. 5-6 oz. per gallon of water