Ever-Clean

Cooling Coil Anti-Foulant

• Water based anti-foulant for cooling coils
• Forms microscopically thin coating that renders cooling surfaces self-cleaning for up to two years
• Prevents fungus and similar organisms from growing in the coating

Directions For Use:

Read entire label and Safety Data Sheet before use. Use only according to directions. Shake well before use. For best results apply with a garden or hand type sprayer adjusted to a fine mist. Use enough EVER-CLEAN to dampen entire coil surface. Coil must be thoroughly cleaned and DRY before application. PRE-CLEAN is ideal for cleaning coil prior to treatment as it is manufactured to be compatible with EVER-CLEAN. Drying of coil can be accelerated by running the fan only. Allow at least 30 minutes for EVER-CLEAN to cure before putting system back on line. Clean spraying equipment with water.

• Clean and dry coil thoroughly.
• If possible spray coil from intake side and leave air flow on to aid complete coil penetration. Use a fine mist and spray lightly to avoid bridging the coating between fins.
• Allow at least 30 minutes cure time before putting system back on line.
• EVER-CLEAN is a water based product. Keep it out of contactors, motors, etc.

Additional Sizes

ITEM #	SIZE	QTY
H-9901	1 GAL	4
H-9932	32 OZ	12