Selected:

4-X Base

DESCRIPTION

4x Base

NON-ACID CONDENSER CLEANER(BASE)


  • Properly dilute with water according to label instructions before use:
    – 6 to 24 parts water for expanding foam on condenser coils
    – 80 parts water for electronic filters, blowers, registers and other components
  • Excellent on greasy contamination
  • U.S.D.A. accepted
  • Contains hazardous component Potassium Hydroxide
  • Must be thoroughly rinsed with water
  • Good ventilation, protective gloves, and eye protection required

Please follow and like us:

INFO SHEET & SDS

OPEN SDS

OPEN INFO

Please follow and like us:

Product Sizes

ITEM # CONTAINER SIZE QTY
H-4X01 1 GAL 4
H-4X32 32 OZ. 6
Please follow and like us:

DIRECTIONS FOR USE

    DIRECTIONS FOR USE:
    DO NOT USE ON INDOOR COILS. USE ONLY OUTDOORS.
    TIP: Cleaning action is accelerated if condenser coil is still warm from use.
    – Read entire label & Safety Data Sheet before use.
    – Disconnect all power before working on equipment.
    – Protect surrounding area from over-spray.
    – Using a suitable low-pressure sprayer, dilute cleaner with water according to dilution rates below.
    – Always spray downwind with a coarse spray to avoid misting.
    – Spray between fins using horizontal motion, working from the bottom up.
    – Wait 3 to 4 minutes until foam begins to subside and rinse completely with large amounts of water.
    – Flush sprayer completely with water after use.
Please follow and like us:

Call to find a distributor near you, or to qualify as a new distributor for our products. 1-800-527-5166 Dismiss